Zakk Wylde 50W Mini Guitar Amplifier
Now available in Black Label Black
- Price: $ 629.99
“It's perfect!”
— Zakk Wylde
Zakk Wylde Signature Mini Amp · Black Label Black
This is the real deal: 50 watts of the exact tone Zakk has been hammering arenas with for over three decades, packed into a head that weighs under 5 lb. Throw it in a backpack and go.
Now limited to 300 hand-numbered units worldwide, each with a certificate signed by Zakk.
Why It CRUSHES
Zakk's real gain structure
One ECC83 preamp tube, the same gain structure he's always used. Give it a second to warm up, then let it roar.
The Wylde Knob
Zakk's signature voice control on the back. Turn left for raw, open and neutral. Turn right for that thick, mid-heavy Wylde growl, with more meat, more low end, more attitude. Dial it in until your amp and cab talk to each other perfectly.
Built-in cab sim
Voiced like Zakk's EV-loaded stacks, on its own line output. Perfect for silent practice, home recording, or any time you don't want to mic a cab.
Full serial FX loop
Put your modulation, delay and reverb between preamp and power amp, or ignore the loop and run everything old-school. Send doubles as preamp out and Return as power amp in. It's your rig, so shape it however you damn well please.
Two speaker outs
Two parallel outputs, ready to punish any cabinet you own. It hits hardest at 4–8Ω.
Built to survive
Built in the EU by Distortion Inc. with Wylde Audio, road-tested, and built to survive anything you throw at it.
Key specs
- Power: 50W into 4Ω
- Preamp tube: 1× ECC83 / 12AX7
- Speaker outputs: 2× parallel, 4–16Ω
- Extras: Wylde Knob, cab sim line out, serial FX loop
- Weight: 2.1 kg / 4.6 lb
No watered-down version. No second chances.
300 units worldwide. When they're gone, they're gone.
| Technical Specs | |
| Power output | 50W into 4Ω |
| Speaker impedance | 4–16Ω |
| Preamp tube | 1× ECC83 / 12AX7 |
| Dimensions | 30 × 17 × 16 cm / 11.8 × 6.69 × 6.30 in |
| Weight | 2.1 kg / 4.6 lb |
| Power supply | 30V DC, 4A, center-positive (included, use only the supplied unit) |
| Warranty | 2 years against manufacturing defects |
| Front Controls | |
| Gain | Distortion intensity. Low = clean, high = saturated roar. |
| Bass | Low-end weight. Up = thump, down = tight and fast. |
| Middle | Core body. High = thick and singing, low = tight and scooped. |
| Treble | High-end cut and attack. Up = bright, down = warmer. |
| Presence | Upper-high bite (power amp stage). Less for bright cabs, more for dark ones. |
| Master | Power amp volume. High = loud, with power tube feel. |
| Power | On / Off |
| Rear Panel | |
| Wylde Knob | Signature voicing. Left = raw and open, right = thick low-mid Wylde growl. |
| Cab sim out | Line output voiced like Zakk's EV-loaded stacks. Doesn't affect the speaker output. |
| FX loop | Fully serial. Send = preamp out, Return = power amp in. |
| Speaker outputs | 2× parallel. Use speaker cables only, not instrument cables. |
| Power in | 30V DC, 4A, center-positive. Supplied power supply only. |
| Impedance & Power | |
| 4Ω | 50W RMS |
| 8Ω | 25W RMS |
| 16Ω | 12.5W RMS |
| 2× 8Ω cabs | = 4Ω: minimum, but safe |
| 2× 16Ω cabs | = 8Ω: completely safe, the amp loves it |
| 2× 4Ω cabs | = 2Ω: NO! 4Ω is the absolute minimum. Go lower and the amp will be damaged. |